Description
Is your heim joint steering a little loose, sloppy, or just twitchy at high speeds? These Delrin bushings can tighten up your steering when properly installed on the heim joint at the knuckle. The bushings will help eliminate saddle movement in your heim steer when paired with your installation kit. We offer 2 versions.
Note: Always check your steering and heim joints for wear and damage and replace worn and/or damaged parts before installing this product.
5651 – This is compatible with 3/4″ bolts only. If you would like to purchase the entire kit with new, drilled-through bolts, then click here it will have the delrin spacers already included.
5652 – This is compatible with all our tapered heim stud kits 5647, 5648, 5649 and 5650. If you would like to purchase the entire kit with tapered studs, then click here for TRU and here for TRO. They will have the delrin spacers already included.
NOTE: do not mount any of our Delrin bushings between the heim joint and the knuckle – read the install instructions for proper installation.
Joel (verified owner) –
I almost hated these and took them back off, but I’m the end they were fantastic!! I mounted them with the small part of the hiem towards the knuckle at first and couldn’t turn very well and my linkage was binding up…. I flipped them over to the large side of the hiem towards the knuckle and they are fantastic!! No roll and tracks nice and straight