Description

Installation Note:

Sales Note:

We do not offer this product individually as just a front or rear line.

Installation Note:

Installation Note:

IMPORTANT: The rear brake line block has a 3/8″ port on one side and a 7/16″ port on the other side and some Broncos came with only 3/8″ fittings. If you have a Bronco with only 3/8″ fittings then they will need to swap out one of their brake lines or resize one end to use the rear extended brake line in this kit. Please see the photo for reference in the slideshow above. 

Contents

Includes:

• Front and Rear Frame to Axle Brake Lines

Information

Introducing the 78-79 Big Bronco and 76-79 F150 4X4 – 0-6 inch lift frame to axle brake line kit. The first and only extended brake line kit that includes the factory front axle bracket.

Lifted Broncos & F-150’s naturally need more brake lines from the frame to the axle. This added length also allows the vehicle more axle travel and articulation.

These brake lines will also work for ’80-’97 Full-Size Broncos and F-150’s that have a Solid Axle swap and are using a High Pinion Dana 44 front axle.

These custom-built brake lines are stainless steel and DOT approved for street use and also great for off-roading.

We have these specially made so you don’t have to guess when it comes to the safety and soundness of your brakes and each one is rigorously pressure tested before being packaged and sent out.

NOTE: These are the lines that go from the frame to the differentials(axles), not the caliper lines! Fits stock to 6″ lifted 78-79 Broncos and 76-79 F150 4×4’s.

Features

Features:

• Made in the USA
• Works with ’78-’79 Bronco and ’76-’79 F-150 4×4

FAQ

A: Will these work with more than 6 inches of lift?
Q: It is possible but we do not know and it really depends on how your suspension is set up (how much travel it has)

A: Will these work with the 80-96 Bronco/F150 with a High Pinion Dana 44 front axle swapped into it?
Q: The front brake line yes. The rear will likely require new hard lines made at the axle junction block.

A: Will these work for 2 wheel drive 76-79 F-150s?
Q: We do not know. We have not tested them with a 2wd front end.

Compatibility

Big Bronco 

• 1978
• 1979

F-150 4×4 

• 1976
• 1977
• 1978
• 1979

Instructions

Click here to download product installation instructions… (Coming Soon)