Choose Year
1 Choose Year
If you are breaking U joints and/or have axle wrap, start here. The torque tamer fits 1966-1977 OEM frames. In 1977 Ford introduced the centurion housing which is a larger differential housing, the different parts required to install that axle are included when you choose the '77 selection.
We also offer a DIY torque tamer which comes with wider & bare crossmember parts to make up for the difference between the different frame widths that are on the market. The pivot point on the main crossmember is also tack welded in place so the end-user can break the tack welds loose and reposition them for different drivetrain configurations.
Torque Tamer Color
2 Torque Tamer Color
Torque Tamer Bolt On Bracket
3 Torque Tamer Bolt On Bracket
You no longer have to worry about finding a buddy to weld the brackets on your axle for your Early Bronco Torque Tamer. James Duff is now offering a Bolt-On option, allowing for a pain-free install. Another benefit by installing this bolt-on option is the main bar of the Torque Tamer will be closer to the center of your driveline, keeping it out of the way of obstacles. This will require the removal of 4 bolts that hold on your third member which will be replaced with the included studs. It comes Zinc plated and includes all required hardware to install.
Note: If you have 400 horsepower at the crank, 35 inch or bigger tires and do aggressive off-roading, we recommend you install the torque tamer with the traditional axle weld-on brackets that come with the kit.
Hellwig TTBOB Spacer
4 Hellwig TTBOB Spacer
If you are planning on running a Hellwig rear swaybar and a torque tamer, you need this spacer! A simple addon that prevents the sway bar from contacting your bolt-on torque tamer bracket and provides proper operation of both parts when installed. No hardware is needed! Use your existing Hellwig u-bolts.
Centurion Housing U-Bolts for Hellwig Sway Bar
5 Centurion Housing U-Bolts for Hellwig Sway Bar
If you are planning on running a Hellwig sway bar with a '77 centurion axle housing, you will need longer u-bolts to complete the installation.
Lube Locker 9" Differential Gasket
6 Lube Locker 9" Differential Gasket
Torque Tamer Bolt-On Bracket Skid Plate Spacer
7 Torque Tamer Bolt-On Bracket Skid Plate Spacer
If you are running a Duff skid plate with a torque tamer bolt-on bracket you will need this spacer.
3rd Member Replacement Studs
8 3rd Member Replacement Studs
This kit of 6 studs is used to replace your old 3rd member studs & complement our bolt-on torque tamer bracket which includes 4 longer studs.