Steering System
1 Steering System
This includes the drag link & tie rod and all hardware except the knuckle hardware, you will choose those on the next section.
Mounting Hardware
2 Mounting Hardware
To install this system you have 3 different mounting hardware solutions.
•564x - 3/4" Bolts and Delrin Spacers. This kit allows you to mount the steering TRO, or tie-rod over the knuckle. Requires drilling of the knuckles. To accomplish this you will need to select the 3/4" knuckle hardware kit. We offer an optional drill bit that is the correct size as an accessory to this system in the options presented later on in the process.
• 5647 Tapered Heim Studs - These allow you to mount the system TRU, or tie-rod under the knuckle using GM or 1-TON knuckles.
• 5648 Tie Rod Under Tapered Heim Studs - These allow you to mount the system TRU, or tie-rod under the knuckle using factory early Bronco knuckles.
• 5660 TRO/TRU Hardware For Early Bronco Knuckles - This kit allows you to mount the tie rod in either orientation without drilling the knuckles.
Coming Soon
• 5649 Tie Rod Over Tapered Heim Studs - These allow you to mount the system TRO, or tie-rod over the knuckle using GM or 1-TON knuckles.
Tapered Reamer
3 Tapered Reamer
If your knuckles have some trash or burrs in the hardware mounting hole, you can use this tool to clean those up.
