Track Bar Riser Bracket, 1966-77 Bronco

16 reviews for Track Bar Riser Bracket, 1966-77 Bronco

Rated 5 out of 5

Kevin Beasley – November 13, 2019

I was very impressed with the construction. Just the part that I need to swap my Duff’s heim joint steering to tie rod over. I love it!
Rated 5 out of 5

brian rasey – January 8, 2020

Used the trac bar riser on my SAS Bronco2 to fix my poor steering geometry and it made a huge difference in combination with flipping my tie rods. Easy to install too.
Rated 5 out of 5

Rob Bendt – January 13, 2020

Great fitment. The correct amount of rise for a tie rod flip. Does not contact the frame when under full stuff like other vendors riser bracket. Easy install if you can weld.
Rated 5 out of 5

neil Smith – March 23, 2020

I recently put in an order for a steering kit. They asked for pictures and even gave me a call to help me get the right geometry needed for my solid axle swap. These guys are awesome I would highly recommend them!
Rated 5 out of 5

Rob Terhaar (verified owner) – February 2, 2021

Fits perfect and works great with a tie rod on top of knuckle flip. Also the new recommended cut off and weld around the old track bar bolt made install a breeze! These guys are awesome, best customer service in the biz!!
Rated 5 out of 5

Sean Yeldell (verified owner) – March 9, 2021

Didnt think I wanted to remove my drop down bracket and install this, Im glad I called and talked to the guys. install was nice and easy, happy I went this route
Rated 5 out of 5

Troy Stolzenburg (verified owner) – April 7, 2021

Heavy duty and very well built! Fits perfect and easy to install!
Rated 5 out of 5

Oliver Kellogg (verified owner) – May 21, 2021

Very Heavy duty. Great fit and includes all hardware.
Rated 5 out of 5

Fred Denton (verified owner) – July 30, 2021

Excellent product and very quick filling my order. thank you
Rated 5 out of 5

Ryan Hubbard – August 5, 2022

Using this with tie rod over steering set up got the steering geometry between my tracbar and drag link as close to perfect as possible which eliminates bump steer. Great product.
Rated 5 out of 5

linsey melancon (verified owner) – September 19, 2022

I was very satisfied with the construction and all required hardware present, Installed complete over the Knuckle Heim Kit with raised Trackbar bracket, & tapered bolts, along with Duff long arms, eliminated all bump steer on my 1975 with 5.5″ JB lift and 35″ MasterCraft MTs, drives straight as an arrow at 80 mph on Louisiana roads. Money well spent.
Rated 5 out of 5

ra_xt504 (verified owner) – November 8, 2022

Great Trac bar riser bracket, good fit and worked out well. I would recommend it if you need one.
Rated 4 out of 5

Christopher S Androw (verified owner) – January 23, 2023

Was hoping it would be a exact fit for my axle to go along with the other bump steer corrections but due to the axle being slighly modified (width) I’ll have to make some adjustments to the bracket. Good news is the bracket is very beafy and well designed so a little grinding here and there wont affect the end result I’m looking for. The guys at the shop have been very patient and helpful in making the adjustments.
Rated 5 out of 5

Eric T (verified owner) – January 6, 2024

This is a top-quality product that fits just right. It is the only piece I did not install myself of the Duck Tuff system. Instead, I reached out to the local community college welding instructor who sent me a capable mobile welding student. He was able to view the installation videos and arrived knowledgeable about the process. The videos also helped me grind the axle, remove the existing bolt, prep with weld-through primer and have the bracket bolted up when the welder arrived. The printed instructions are helpful but the videos are pure gold when it came to welding this bracket. I don’t think I would have bought the product otherwise just because the whole welding thing was beyond my capability and gear. The quality of the bracket and the videos made this surprisingly simple.
Rated 5 out of 5

John Weatherbie (verified owner) – April 9, 2024

Very beefy bracket. Does not get in the way during full lock and has helped eliminate bump steer in my truck
Rated 5 out of 5

Ross Gordon (verified owner) – June 20, 2025

This bracket fit well, I had to use C clamps to pull everything nice and tight to get a perfect fit for welding but that was no big deal.

Weight	5.5 lbs
Dimensions	8 × 6 × 1 in